Power Requirements:
120 VAC, 20 AMP, 50/60 HZ, grounded. |
Media Throwing Wheel:
4" Diameter with a speed range to 20,000 RPM for high velocity
impact. Motor is an Electric Brushless/DC, with Direct Drive hook-up
and matching Controller Board. |
Parts Basket:
(Stainless Steel)
SB-10= 10" dia. x 10" deep
Perforation is 0.250 Ø standard.
Refrigerant:
Liquid Nitrogen at -320º F. at 25 PSIG maximum. |
Gaseous Nitrogen:
Using an ambient vaporizer (250 scfh) to create GN
2
for the media assist system. |
Controls:
Cycle timer, 0 to 60 minutes. Digital temperature controller
with set point and actual temperature display. Throwing wheel speed
control dial; digital readout tachometer for throwing wheel speed.
Parts basket speed control dial. |
Media Flow System:
Gaseous Nitrogen or Clean/Dry Shop Air (30/35 PSIG). |
Media Type:
System can operate utilizing any plastic blast media. |
Insulation:
2" Thick rigid, high density polyurethane foam for cold containment
around inner blast chamber. |
|
